Programmable Dry Deck Kit
with the amazing YSwitch
This Dry Deck kit utilizes the amazing YSwitch – a sophisticated device that is based on a solenoid which by diverting the atmospheric air intake, it diverts the water flow either to the nozzle or to the drain outlet, without producing water hammer. This switching mechanism allows for individual control of every nozzle and a series of water effects.
FPK 7000 incorporates 2 XL 300 solid unibody luminaires in RGB or White color for incredible illumination performance on every type of water effect. These luminaires can create impressive, million-color, Light Shows and if combined with VFD(s) on the Pump(s), spectacular results can be achieved. The heavy duty, all stainless steel housing also incorporates a flow valve for spray height adjustment and each nozzle’s swivel permits easy alignment of the streams. It comes with square or round cover, it is flush mounted and it is absolutely safe to walk on top of it. The entire kit is remarkably resistant to impacts and corrosion and its design allows for easy & fast installation and maintenance. These units can be easily controlled through the FCU, giving you full flexibility to create your own stunning water & light show or we can create it for you.
- Water Choreographies
- Programmable Dry Deck Kit
- AISI 304 Stainless Steel Construction
- YSwitch Mechanism
- No Water Hammer
- Wide Selection of Nozzles
- Available with Round or Square Cover
- Flush Mounted / Trip Safe
- Designed to be safe to walk on top
- Remarkable Construction Quality
- 2 x XL300 RGB Luminaires
- Lights made of Stainless Steel solid unibody
- Incredible Light Intensity & Vivid Colors
- IP68 Protection Degree – Class III
- 16-Step Thermal Protection
- Stylish Design & Finishing
- High Corrosion & Impact Resistance
- Includes flow valve
- Microprocessor on each luminaire
- Easy & Fast Installation
Flush Mounted / Trip-safe
Dry Deck fountains are designed to invite spectators become part of the show. So, we designed these kits to be absolutely safe to walk on top. They withstand the weight and they are absolutely flat to prevent tripping hazards.
Stainless Steel
All parts of these kits (besides the switching system) are entirely made of exceptional quality, heavy-duty Stainless Steel. This makes them look beautiful but also invulnerable to corrosion, impacts and any kind of deterioration.
The Stainless Steel ResearchExtraordinary Light Intensity
& Vivid Colors
XL300 can illuminate effectively just about anything with pure white or any color among 16.7 million vivid hues. The sophisticated lens creates a uniform beam at precisely 19° (or 58° on request).
Pure Stainless Steel Unibody
The housing of XL300 is something more than a simple housing. We have created a unique unibody; made of pure, heavy-duty Stainless Steel to withstand the harshest conditions, day-in day-out for decades. The most amazing thing with this unibody is that it dissipates heat in the most effective way. It is also designed to protect the light source from corrosion, aggressive water and impacts, requiring minimal maintenance and always looking brand new. In addition, the flawless waterproofing offers IP68 protection degree for up to 2m / 6ft water depth.
Exceptional Heat Dissipation by the
Stainless Steel Unibody.
The precisely engineered and manufactured unibody is made from superior quality solid stainless steel (AISI 304 standard – 316 on request) with strategically located heatsinks which offer exceptional heat dissipation and prevent the luminaire from overheating even when it is placed in room-temperature locations.
Microprocessor Inside
All luminaires incorporate cutting-edge microprocessors that constantly monitor the luminaire’s status & temperature, and at the same time communicate with the controlling device receiving and interpreting data about ID, color and intensity. As complicated as it might seem, the whole network works by itself. You don’t have to worry about voltage drop, over-voltage, polarity, over-heating, internal or external interference. Everything Just works. All you have to do is enjoy the limitless spectrum of 16.7 million colors.
Distance matters no more
XL300 can work under both 12V and 24V DC and anywhere in between without affecting light intensity. It also provides a 10% margin for voltage drop and over-current. And since the controlling information travels digitally within the same 3-wire cable, you can have a phenomenal cable length of up to 200 meters between the controller and the lights.
Four 3 Wires
The magic with TheSmartLEDs is that they require just a simple 3-wire cable to operate (no shielding required). The two wires are used for current and the third one is used for sending and receiving led:bus data. This drops cable costs by 25% and also makes installation much easier.
Self-Protection
XL300 thinks for itself so you don’t have to. If the temperature inside the fixture rises for any reason (e.g. operating outside of water), the microprocessor will gradually dim the light in 16 steps in order to cool down instead of just switching it off. This way, your fountain will keep being illuminated and the luminaire’s life-cycle is extended.
Flicker Free
A major drawback of low-end LED luminaires is the flickering effect created on the fast-moving water surface. Apart from annoying, this effect can cause serious health problems to spectators. We have eliminated this issue by utilizing special electronics inside the luminaire, raising the frequency to non-conceivable levels.
IP68 & CE
XL300, just like any other Fontana underwater luminaire offers exceptional, long-lasting waterproofing.
The ingress protection degree of XL300 is IP68 rated and certified for up to 2m / 6ft water depth. In addition, XL300 is CE certified.
96.7% Cost and Energy Saving
Would you believe that by excessively illuminating your fountain would actually save you up to 96.7% on energy costs, minimize your CO2 footprint and save hundreds of trees per year? We tried hard to achieve this.
Launch the Savings Calculator
| Programmable Dry Deck Kit with Switching Mechanism FPK 7000 Series | |
| YSwitch | Low-Voltage 12V or 24V DC Switching Mechanism for individual control of every stream |
| Illumination | 2 x XL 300 RGB – Each luminaire: 3 High Power LEDs | 219 lm | 6W | 12-24V DC |
| Nozzles | This unit can be combined with any 1” or 1½” nozzle. Highly Recommended: Clear Water: Smooth Bore with any orifice between 8 and 20mm, Hollow Frothy Water: Foam, Fizz Heads: Cluster, Lily, Fleur de Lis, Bouquet – with flat surface to be trip-safe |
| Material | All Stainless Steel AISI 304 with plastic YSwitch body |
| Cables | 3.0 Meters waterproof cables |
| Cover | Square (.SQ) or Round (.R) Dimensions: 400 x 400 mm |
| Niche | Optional (.N) Niche Diameter: 350 mm |
Downloads
You can download any of the following files for your own personal use. Information contained in these files might change without prior notice. Also, copy in part or as whole, as well as reproduction, publication or whatsoever are strictly prohibited without written consent by Fontana Fountains.
You must be logged in to view this content - login
Request Quote
You can quickly ask for a quote through this form. Our sales team will do their best to reply to you within 2 hours (during workdays).
Ask for a Quote